Notices of cutting machine operation

Notices of cutting machine operation 

1、Check whether the machine pipeline leakage phenomenon, leakage phenomenon will not boot.

2、Check whether there are obstacles and inspection work surface and the guide rail after boot, if there are obstacles must be removed.

3、The operator can not leave work at random, non operating personnel shall not start the machine.

4、In the operation such as in the case of emergency, immediately press the red emergency stop switch, prevent accidents.

5、 Repair and maintenance of CNC cutting machine to the attention of a technician command and coordination.

6、Before the shutdown close all valves, and the road fangkongqi remaining gas.

7、If the pipeline tempering phenomenon, should be immediately cut off the power.